BIRMINGHAM YCL-1440 LATHE
DESCRIPTION & FEATURES
This 14" Swing BIRMINGHAM YCL-1440 Lathe is an all geared headstock 14" x 40" metal cutting lathe and will make a great new addition to your machine shop floor. Some of the many features included on this Birmingham 14" x 40" lathe are a one piece cast Iron base, a 3 HP main motor and a 1 1/2" spindle bore . It is equipped with inch and metric threading and requires no change gears for most thread cutting applications. The bed is made of a fine grain high tensile strength cast iron and the gears, shafts, bedways and spindle are all precision hardened & ground. The spindle on the Birmingham YCL-1440 Lathe is supported at three points by precision bearings and will assure your machinist of a good, solid and accurite cut for many years to come . Available with either 220 Volt Single phase or 220 Volt 3 Phase pre-wired electrics this Birmingham YCL-1440 Lathe is built to be a long time performer . Additional features and equipment include 3 and 4-Jaw Chucks, face plate, steady rest, follow rest, removable gap bed, 4-Way Tool Post, thread chasing dial, dead centers, reducing sleeve, full length splash guard, chip tray, foot brake, worklight and coolant system .
Taper attachment is optional but installation is free when ordered at time of purchase.
BIRMINGHAM LATHE | Specifications |
Model | YCL-1440 |
Size | 14" x 40" |
Swing over bed | 14" |
Distance between centers | 40" |
Swing over cross slide | 8 5/8" |
Swing over gap | 20" |
Spindle hole dia. | 1 1/2" |
Spindle | D1-4 Camlok |
Spindle speeds | 45 to 1800 ( 16 speeds ) |
Metric threads | 0.45 - 7.5 mm, 22 kinds |
Inch threads | 4 - 112 TPI, 40 kinds |
Width of bed | 8 1/8" |
Main motor | 3 HP |
Electrical | Pre-Wired 220V / 3 phase or 220V / Single Phase |
Coolant pump motor | 1/8 HP |
Machine Net Weight | 2000 lbs |
Standard Equipment
6" 3-Jaw Chuck, 8" 4-Jaw Chuck, 10" Face Plate, 3 3/4" Steady Rest, Follow Rest, Removable Gap Bed, 4-Way Tool Post, Stand, Thread Chasing Dial, Dead Centers, Reducing Sleeve, Full Length Splash Guard, Chip Tray, Foot Brake, Worklight, Coolant
Optional Equipment
5C Collet Closer - Hand Lever Type
5C Collet Chuck - Front Operated
Taper Attachment
Micro Carriage Stop
Digital Readout: Newall, Acu-Rite or Birmingham Uniq