• Edwards Jaws 100 ton Deluxe Ironworker

    $28,499.00 $28,000.00

    Edwards Jaws 100 ton Deluxe Ironworker

    The Edwards 100 ton Deluxe features five available workstations including an integrated notching station, 16 inch bar shear, heavy duty punch station, round and square bar shear and angle shear. Electric foot pedal and electric stroke control are also standard features.

    This Edwards ironworker is also equipped with and electric stroke control. This easy to adjust system speeds up production time by limiting the stroke of the machine to just enough to complete the task at hand. It can also be helpful when using special tooling that requires a limited stroke to perform properly.

    Like all Edwards machines, this unit works in a completely vertical motion - straight down on the work. There is no arc of tool against the material to be cut or punched. All stations operate as a unit so you can move from punch to shear to notcher to angle shear without changing or adding any new equipment. 


    1 year manufacturer's warranty 

    Part #: Jaws100D-EDW
    Ships From: Factory shipped
    Availability: Limited stock - Call for availability

    Stations: 5
    Rated Capacity (tons): 100
    Punching Capacity (Std): 1-1/16 inch diameter in 1 inch plate
    Punching Throat Depth (inches): 10
    Punching Work Height (inches): 36
    Flat Bar Shearing Max Width (inches): 1/2 x 16
    Flat Bar Shearing Max Thickness (inches): 1 x 6
    Flat Bar Shearing Max Round Cap (inches): 1
    Flat Bar Shearing Max Square Cap (inches): 1
    Flat Bar Shearing Work Height (inches): 34
    Angle Shear Max Size 90 Deg (inches): 5 x 5 x 1/2
    Angle Shear Work Height (inches): 40
    Coper Notcher Max Cap (inches): 3 x 5 x 1/2
    Coper Notcher Work Height (inches): 36
    Throat Depth (inches): 10
    Open Height (inches): 8.5
    Shut Height (inches): 7
    Brake Capacity (inches): 10
    Round Bar Shear Capacity (inches): 1-1/2
    Square Bar Shear Capacity (inches): 1-1/4
    Stroke (inches): 1.375
    Cycle Time: 2 seconds
    Motor (Std): 10 hp, 1725 rpm
    Hydraulics: 24 gpm
    Valve Pressure: 3600 psi
    Reservoir Capacity: 17 gallon
    Cylinder: 2-1/2 inch ram
    Weight (pounds): 4850
    Dimensions (LxWxH): 43 x 44 x 62


    • 5 stations
    • Round & square bar shears standard
    • Dedicated notching station
    • 16 inch capacity bar shear
    • Punching station: 1-1/16 inch thru 1 inch plate
    • Angle shear 5 x 5 x 1/2