• Edwards Jaws 40 ton Ironworker

    $10,921.00 $9,599.00

    Edwards Jaws 40 ton Ironworker - Best Seller !!

    IW40-1P230: 40 Ton Ironworker 1 Phase, 230 Volt - INCLUDED W/ ORDER

    The Jaws 40 ton Ironworker is a fully featured ironworker with a small footprint. Featuring four available workstations, the Jaws 40 ton incorporates a 10 inch bar shear, angle shear, heavy duty punch station, and an open tooling cavity that can hold an array of optional tooling as standard features.

    This Edwards ironworker is also equipped with and electric stroke control. This easy to adjust system speeds up production time by limiting the stroke of the machine to just enough to complete the task at hand. It can also be helpful when using special tooling that requires a limited stroke to perform properly.

    Like all Edwards machines, this unit works in a completely vertical motion - straight down on the work. There is no arc of tool against the material to be cut or punched. All stations operate as a unit so you can move from punch to shear to angle shear without changing or adding any new equipment. 


    1 year manufacturer's warranty 

    Part #: Jaws40-EDW
    Ships From: Factory shipped
    Availability: Usually ships within 2-4 weeks

    Stations: 4
    Rated Capacity (tons): 40
    Punching Capacity (Std): 1 inch diameter in 1/2 plate
    Punching Throat Depth (inches): 7
    Punching Work Height (inches): 37.625
    Flat Bar Shearing Max Width (inches): 3/8 x 10
    Flat Bar Shearing Max Thickness (inches): 3/4 x 4
    Flat Bar Shearing Max Round Cap (inches): 3/4
    Flat Bar Shearing Max Square Cap (inches): 3/4
    Flat Bar Shearing Work Height (inches): 35.5
    Angle Shear Max Size 90 Deg (inches): 3 x 3 x 1/4
    Angle Shear Work Height (inches): 40.75
    Open Station Work Height (inches): 43
    Throat Depth (inches): 7
    Open Height (inches): 8
    Shut Height (inches): 7
    Brake Capacity (inches): 8
    Stroke (inches): 1
    Cycle Time: 2 seconds
    Motor (Std): 5 hp, 1725 rpm
    Hydraulics: 3.5 gpm - 1 stage
    Valve Pressure: 3000 psi
    Reservoir Capacity: 7 gallon
    Cylinder: 4 inch ram
    Weight (pounds): 1400
    Dimensions (LxWxH): 23 x 32 x 54


    • 4 stations
    • 10 inch capacity bar shear
    • Punching station: 1 inch thru 1/2 plate
    • Angle shear 3 x 3 x 1/4
    • Open station for optional tooling