• Edwards Jaws 65 ton Ironworker

    $20,099.00 $19,799.00

    Edwards Jaws 65 ton Ironworker

     - Finance as low as $397.95

    The Jaws 65 ton is our most versatile in the Edwards Ironworker line of products. Featuring five available workstations, the Jaws 60 ton incorporates a universal open tooling cavity, 24 inch bar shear, heavy duty punch station, angle shear and integrated notching station.

    This Edwards ironworker is also equipped with and electric stroke control. This easy to adjust system speeds up production time by limiting the stroke of the machine to just enough to complete the task at hand. It can also be helpful when using special tooling that requires a limited stroke to perform properly.

    Like all Edwards machines, this unit works in a completely vertical motion - straight down on the work. There is no arc of tool against the material to be cut or punched. All stations operate as a unit so you can move from punch to shear to notcher to angle shear without changing or adding any new equipment. 


    1 year manufacturer's warranty 

    Part #: Jaws65-EDW
    Ships From: Factory shipped
    Availability: Limited stock - Call for availability

    Stations: 5
    Rated Capacity (tons): 65
    Punching Capacity (Std): 1-1/16 inch diameter in 3/4 plate
    Punching Throat Depth (inches): 9.75
    Punching Work Height (inches): 36
    Flat Bar Shearing Max Width (inches): 3/8 X 24
    Flat Bar Shearing Max Thickness (inches): 1 x 4
    Flat Bar Shearing Max Round Cap (inches): 1
    Flat Bar Shearing Max Square Cap (inches): 1
    Flat Bar Shearing Work Height (inches): 33.5
    Angle Shear Max Size 90 Deg (inches): 5 x 5 x 1/4 or 4 x 4 x 3/8
    Angle Shear Work Height (inches): 42
    Coper Notcher Max Cap (inches): 2-1/2 x 6 x 3/8
    Coper Notcher Work Height (inches): 35-1/2
    Open Station Size (inches): 11.5 x 9.75
    Open Station Work Height (inches): 42
    Throat Depth (inches): 9.75
    Open Height (inches): 8.125
    Shut Height (inches): 6.75
    Brake Capacity (inches): 10
    Stroke (inches): 1.377
    Cycle Time: 2 seconds
    Motor (Std): 7.5 hp, 1725 rpm
    Hydraulics: 10.5 gpm - 2 stage
    Valve Pressure: 2800 psi
    Reservoir Capacity: 17 gallon
    Cylinder: 3-1/2 inch ram
    Weight (pounds): 4220
    Dimensions (LxWxH): 43 x 42 x 55


    • 5 stations
    • Universal open tooling station and dedicated coper/notcher station
    • 24 inch capacity bar shear
    • Punching station: 1-1/16 inch thru 3/4 plate
    • Angle shear 5 x 5 x 1/4 or 4 x 4 x 3/8