• Edwards Jaws 75 ton Ironworker

    $16,899.00
    Free Shipping!

    Edwards Jaws 75 ton Ironworker



    The Jaws 75 ton ironworker is a great value for the ton. Featuring four available workstations, the Jaws 75 ton incorporates a 14 inch bar shear, angle shear, heavy duty punch station, and a coper notcher in a tooling cavity that can also hold a variety of optional tooling.

    This Edwards ironworker is also equipped with and electric stroke control. This easy to adjust system speeds up production time by limiting the stroke of the machine to just enough to complete the task at hand. It can also be helpful when using special tooling that requires a limited stroke to perform properly.

    Like all Edwards machines, this unit works in a completely vertical motion - straight down on the work. There is no arc of tool against the material to be cut or punched. All stations operate as a unit so you can move from punch to shear to notcher to angle shear without changing or adding any new equipment. 

    Warranty: 

    1 year manufacturer's warranty 

    Part #: Jaws75-EDW
    Ships From: Factory shipped
    Availability: Limited stock - Call for availability

    Stations: 4
    Rated Capacity (tons): 75
    Punching Capacity (Std): 1-1/16 inch diameter in 7/8 plate
    Punching Throat Depth (inches): 10
    Punching Work Height (inches): 41.5
    Flat Bar Shearing Max Width (inches): 1/2 x 14
    Flat Bar Shearing Max Thickness (inches): 3/4 x 10
    Flat Bar Shearing Max Round Cap (inches): 1
    Flat Bar Shearing Max Square Cap (inches): 1
    Flat Bar Shearing Work Height (inches): 41.5
    Angle Shear Max Size 90 Deg (inches): 5 x 5 x 3/8
    Angle Shear Work Height (inches): 49
    Open Station Work Height (inches): 43.5
    Throat Depth (inches): 10
    Open Height (inches): 8.75
    Shut Height (inches): 6.875
    Brake Capacity (inches): 12
    Stroke (inches): 1.875
    Cycle Time: 2 seconds
    Motor (Std): 7.5 hp, 1725 rpm
    Hydraulics: 10.5 gpm - 2 stage
    Valve Pressure: 2800 psi
    Reservoir Capacity: 17 gallon
    Cylinder: 3-1/2 inch ram
    Weight (pounds): 3300
    Dimensions (LxWxH): 38 x 44 x 60

    Includes:

    • 4 stations
    • Coper notcher
    • 14 inch capacity bar shear
    • Punching station: 1-1/16 inch thru 7/8 plate
    • Angle shear 5 x 5 x 3/8